Máy đo lực điện tử DIGITECH Just pro DTG series

Model : 0
Bảo hành: 12 tháng
Tình trạng: Còn hàng
Hãng:
Mã sản phẩm:DTG series
Xuất xứ:Japan
Bảo hành:12 tháng
Giá bán: Liên hệ Giá đã bao gồm thuế VAT
Đặt hàng
- Khung giờ giao hàng từ 8h00 - 17h00 hàng ngày.
- Sản phẩm chính hãng, cung cấp CO & CQ.
- Bảo hành miễn phí theo tiêu chuẩn nhà sản xuất.

Vui lòng liên hệ để có giá tốt nhất!

0945942992

Máy đo lực điện tử DIGITECH Just pro DTG series

Hãng sản xuất: DIGITECH - Nhật bản

Chức năng chính:

- Easy-to read,auto-reverse large LCD display.

- Connector insert and pull-out test function.

- Auto power OFF function.

- ±NG,OK judgments with LED display(with open collector output)

- Memory up to 1000 data of peak and hold values.

- Print out measuring data with connection to printer. (Serial output,digimatic output)

-connectable to computer through USB output cable （standard accessory）

- Automatic peak measuring value record(Auto-memory function)

- By setting control value of load and displacement it is possible for control the instruments.

- Overload warning.(LED flash and sound alarm)

- Ni-MH battery. (environment-friendry and pollution-free battery)

- Battery remain display.

- Display reverse function.

- Present values of ON,OFF points. (by connection with points of switch and connectors etc.)

- A multi AC adapter(AC100V～240V) is provided for battery charger.

Measuring shaft	M6
Measuring accuracy	±0.2％ F.S
Measuring unit	N, kgf(gf), lb
Measuring cycle	1ms, 5ms, 16ms, 50ms　 (selectable)
Display renewal cycle	1, 2, 5, 10, 20times /sec　 (selectable)
Communication method	USB mini B
Memory	1000 data
External input	Mitutoyo digimatic input, pulse input. （displacement meter） point ON,OFF load detection input.
Printer output	Serial output, Mitutoyo digimatic output.
Output for test stand	Load setting /displacement setting method UP,DOWN,STOP output. overload output (open collector output)
Analog output	±2V / f.s（load value only）
Tolerance judgment output	LOW・GOOD・HIGH LED lighting and output. （open collector output）
Display	H45mm×W50mm LCD. Load: 6digit、 Displacement: 7digit. Battery remain quantity.
Dimension	H220mm×W74mm×D37mm
Weight	approx. 500g
Operationtemperrature	0℃～＋40℃
Power source	Ni-MH battery. AC100V～240V multi AC adapter.
Standard accessory	6pcs jig. A multi AC adapter. USB cable. Carrying case Operation manual. Test Certificate.

DIGITECH Just pro DTG series