Xi lanh khí đặc biệt (SMC)

Model : 0
Bảo hành: 12 tháng
Tình trạng: Còn hàng
Hãng:
Giá bán: Liên hệ Giá đã bao gồm thuế VAT
Đặt hàng
- Khung giờ giao hàng từ 8h00 - 17h00 hàng ngày.
- Sản phẩm chính hãng, cung cấp CO & CQ.
- Bảo hành miễn phí theo tiêu chuẩn nhà sản xuất.

Vui lòng liên hệ để có giá tốt nhất!

0945942992

Xi lanh khí đặc biệt (SMC)

Sine Rodless Cylinder REA

Type	Series/CAD	Action	Bore size (mm)
Basic	REA	Double acting	25,32,40,50,63
Direct mount	REAR		10,15,20,25,32,40
Slider (Slide bearing)	REAS
Slider (Ball bushing bearing)	REAL
Linear guide (Single axis)	REAH		10,15,20,25
Linear guide (Double axis)	REAHT		25,32
Features	Allows high-speed transfer of a workpiece which must avoid shock/impact. Maximum speed: 300 mm/s

Sine Rodless Cylinder REB

Type	Series/CAD	Action	Bore size (mm)
Direct mount	REBR	Double acting	15,25,32
Linear guide (Single axis)	REBH		15,25
Linear guide (Double axis)	REBHT		25,32
Features	Allows high-speed transfer of a workpiece which must avoid shock/impact. Maximum speed: 600 mm/s

Sine Cylinder REC

Type	Series/CAD	Action	Bore size (mm)
Standard	REC	Double acting	20,25,32,40
Features	Allows high-speed transfer of a workpiece which must avoid shock/impact.

Smooth Cylinder CQSY/CQ2Y/CM2Y/CG1Y/CA2Y

Type	Series/CAD	Action	Bore size (mm)	Min. operating pressure (MPa)
Compact cylinder	CQSY	Double acting	12,16	0.03
Compact cylinder	CQSY		20,25	0.02
Compact cylinder	CQ2Y		32,40	0.02
Compact cylinder	CQ2Y		50,63,80,100	0.01
Air cylinder	CM2Y		20,25,32,40	0.02
Air cylinder	CG1Y		20,25,32,40	0.02
Air cylinder	CG1Y		50,63,80,100	0.01
Air cylinder	CA2Y		40	0.02
Air cylinder	CA2Y		50,63,80,100	0.01
Air cylinder	CS2Y		125, 140, 160	0.005
Features	Bi-directional low-friction operation possible regardless of the direction of pressure With auto switch (Series CDQSY : CDQSY, Series CDQ2Y : CDQ2Y, Series CDM2Y : CDM2Y, Series CDG1Y : CDG1Y, Series CDA2Y :

Low Speed Cylinder CJ2X/CUX/CQSX/CQ2X/CM2X

Type	Series	Bore size (mm)	Min. operating pressure (MPa)	Min. piston speed (mm/s)
Air cylinder	CJ2X	10,16	0.06	1
Free mount cylinder	CUX	10,16	0.06	1
Free mount cylinder	CUX	20,25,32	0.05	0.5
Compact cylinder	CQSX	12,16	0.03	1
Compact cylinder	CQSX	20,25	0.025	0.5
Compact cylinder	CQ2X	32,40	0.025	0.5
Compact cylinder	CQ2X	50,63,80,100	0.01	0.5
Air cylinder	CM2X	20,25,32,40	0.025	0.5
Features	Stable low-speed operation even at 0.5 mm/s (1 mm/s in the case of φ16 and under)

Low Friction Cylinder/Metal Seal MQQ/MQM/MQP

Type	Series/CAD	Bore size (mm)	Pressure range (MPa)	Driving speed (mm/s)
Standard	MQQT	10,16,20,25, 30,40	0.005 to 0.5	0.3 to 300
Anti-lateral load	MQQL	10,16,20,25, 30,40	0.005 to 0.7	0.5 to 500
	MQML	6	0.02 to 0.7	0.5 to 1000
	MQML	10,16,20,25	0.005 to 0.7	0.5 to 1000
High speed/ High frequency	MQMLxxH	10,16,20,25	0.01 to 0.7	5 to 3000
Single acting	MQP	4,6,10,16,20	0.001 to 0.7	---
Features	Covers a range of driving speeds and output controls not possible with standard cylinders thanks to the metal seal structure with minimal sliding resistance.

High Power Cylinder RHC

Type	Series/CAD	Action	Bore size (mm)
Standard	RHC	Double acting	20,25,32,40, 50,63,80,100
Standard	RHC-XC93	Double acting	32,40
Features	Provides 10 to 20 times the energy absorption capacity of general purpose cylinder (Series CG1). Smooth cushioning from high speed operation (3000 mm/s) with light loads and low/medium operation with heavy loads. XC93 : With greater water resistance + stable lubrication function 5 times stronger against water (liquids) than the standard model (Series RHC)

3 Position Cylinder RZQ

Type	Series/CAD	Action	Bore size (mm)
Standard	RZQ	Double acting	32,40,50,63
Features	Equipped with intermediate stop mechanism Two-stage stroke possible with just a minute extension